|
ESO (1)
|
Reference
|
Title of the Harmonised
Standards
|
First
publication OJ (2)
|
|
CEN
|
EN
81-3:2000
|
Safety
rules for the construction and installation
of lifts - Part 3: Electric and hydraulic
service lifts.
|
27.11.2001
|
|
CEN
|
EN
115:1995
|
Safety
rules for the construction and installation
of escalators and passenger conveyors.
|
01.07.1995
|
|
CEN
|
EN
115.A1:1998
|
Safety
rules for the construction and installation
of escalators and passenger conveyors -
Amendment 1
|
15.10.1998
|
|
CEN
|
EN
201:1997
|
Rubber
and plastics machines - Injection moulding
machines - Safety requirements
|
04.06.1997
|
|
CEN
|
EN
201.A1:2000
|
Rubber
and plastics machines - Injection moulding
machines - Safety requirements - Amendment 1
|
20.05.2000
|
|
CEN
|
EN
280:2001
|
Mobile
elevating work platforms - Design
calculations, stability criteria,
construction - Safety, examinations and
tests
|
14.06.2002
|
|
CEN
|
EN
289:1993
|
Rubber
and plastics machinery - Compression and
transfer moulding presses - Safety
requirements for the design
|
27.07.1994
|
|
CEN
|
EN
292-1:1991
|
Safety
of machinery - Basic concepts, general
principles for design - Part 1 : Basic
terminology, methodology
|
24.06.1992
|
|
CEN
|
EN
292-2:1991
|
Safety
of machinery - Basic concepts, general
principles for design - Part 2 : Technical
principles and specifications
|
24.06.1992
|
|
CEN
|
EN
292-2/A1:1995
|
Safety
of machinery - Basic concepts, general
principles for design - Part 2 : Technical
principles and specifications - Amendment 1
|
14.02.1996
|
|
CEN
|
EN
294:1992
|
Safety
of machinery - Safety distance to prevent
danger zones being reached by the upper
limbs
|
25.08.1993
|
|
CEN
|
EN
349:1993
|
Safety
of machinery - Minimum gaps to avoid
crushing of parts of the human body
|
25.08.1993
|
|
CEN
|
EN
415-1:2000
|
Safety
of packaging machines - Part 1 : Terminology
and classification of packaging machines and
associated equipment
|
14.06.2002
|
|
CEN
|
EN
415-2:1999
|
Packaging
machines Safety - Part 2: Pre-formed rigid
container packaging machines
|
20.05.2000
|
|
CEN
|
EN
415-3:1999
|
Safety
of packaging machines - Part 3: Form, fill
and seal machines.
|
27.11.2001
|
|
CEN
|
EN
415-4:1997
|
Safety
of packaging machines - Part 4: Palletisers
and depalletisers
|
04.06.1997
|
|
CEN
|
EN
418:1992
|
Safety
of machinery - Emergency stop equipment,
functional aspects - Principles for design
|
25.08.1993
|
|
CEN
|
EN
422:1995
|
Rubber
and plastics machines - Safety - Blow
moulding machines intended for the
production of hollow articles - Requirements
for the design and construction
|
08.08.1996
|
|
CEN
|
EN
453:2000
|
Food
processing machinery - Dough mixers - Safety
and hygiene requirements.
|
10.03.2001
|
|
CEN
|
EN
454:2000
|
Food
processing machinery - Planetary mixers -
Safety and hygiene requirements.
|
10.03.2001
|
|
CEN
|
EN
457:1992
|
Safety
of machinery - Auditory danger signals -
General requirements, design and testing
(ISO 7731:1986, modified)
|
25.08.1993
|
|
CEN
|
EN
474-1:1994
|
Earth-moving
machinery - Safety - Part 1: General
requirements
|
31.12.1994
|
|
CEN
|
EN
474-1/A1:1998
|
Earth-moving
machinery - Safety - Part 1: General
requirements – Amendment 1
|
15.10.1998
|
|
CEN
|
EN
474-2:1996
|
Earth-moving
machinery - Safety - Part 2: Requirements
for tractor-dozers
|
15.10.1996
|
|
CEN
|
EN
474-3:1996
|
Earth-moving
machinery - Safety - Part 3: Requirements
for loaders
|
15.10.1996
|
|
CEN
|
EN
474-4:1996
|
Earth-moving
machinery - Safety - Part 4: Requirements
for backhoe loaders
|
15.10.1996
|
|
CEN
|
EN
474-5:1996
|
Earth-moving
machinery - Safety - Part 5: Requirements
for hydraulic excavators
|
15.10.1996
|
|
CEN
|
EN
474-6:1996
|
Earth-moving
machinery - Safety - Part 6: Requirements
for dumpers
|
15.10.1996
|
|
CEN
|
EN
474-7:1998
|
Earth-moving
machinery - Safety - Part 7: Requirements
for scrapers
|
15.10.1998
|
|
CEN
|
EN
474-8:1998
|
Earth-moving
machinery - Safety - Part 8: Requirements
for graders
|
15.10.1998
|
|
CEN
|
EN
474-9:1998
|
Earth-moving
machinery - Safety - Part 9: Requirements
for pipelayers
|
15.10.1998
|
|
CEN
|
EN
474-10:1998
|
Earth-moving
machinery - Safety - Part 10: Requirements
for trenchers
|
15.10.1998
|
|
CEN
|
EN
474-11:1998
|
Earth-moving
machinery - Safety - Part 11: Requirements
for earth and landfill compactors
|
15.10.1998
|
|
CEN
|
EN
500-1:1995
|
Mobile
road construction machinery - Safety - Part
1 : Common requirements
|
14.02.1996
|
|
CEN
|
EN
500-2:1995
|
Mobile
road construction machinery - Safety - Part
2 : Specific requirements for road-milling
machines
|
14.02.1996
|
|
CEN
|
EN
500-3:1995
|
Mobile
road construction machinery - Safety - Part
3 : Specific requirements for soil
stabilisation machines
|
14.02.1996
|
|
CEN
|
EN
500-4:1995
|
Mobile
road construction machinery - Safety - Part
4 : Specific requirements for compaction
machines
|
14.02.1996
|
|
CEN
|
EN
528:1996
|
Rail
dependent storage and retrieval equipment -
Safety
|
28.11.1996
|
|
CEN
|
EN
528/A1:2002
|
Rail
dependent storage and retrieval equipment
– Safety - Amendment 1
|
14.08.2003
|
|
CEN
|
EN
536:1999
|
Road
construction machines - Asphalt mixing
plants - Safety requirements
|
05.11.1999
|
|
CEN
|
EN
547-1:1996
|
Safety
of machinery - Human body measurements -
Part 1: Principles for determining the
dimensions required for openings for the
whole body access into machinery
|
22.03.1997
|
|
CEN
|
EN
547-2:1996
|
Safety
of machinery - Human body measurements -
Part 2: Principles for determining the
dimensions required for access openings
|
22.03.1997
|
|
CEN
|
EN
547-3:1996
|
Safety
of machinery - Human body measurements -
Part 3: Anthropometric data
|
22.03.1997
|
|
CEN
|
EN
563:1994
|
Safety
of machinery - Temperatures of touchable
surfaces - Ergonomics data to establish
temperature limit values for hot surfaces
|
31.12.1994
|
|
CEN
|
EN
563/A1:1999
|
Safety
of machinery - Temperatures of touchable
surfaces - Ergonomics data to establish
temperature limit values for hot surfaces -
Amendment 1
|
15.04.2000
|
|
CEN
|
EN
574:1996
|
Safety
of machinery - Two-hand control devices -
Functional aspects - Principles for design
|
22.03.2000
|
|
CEN
|
EN
608:1994
|
Agricultural
and forestry machinery - Portable chain saws
- Safety
|
31.12.1994
|
|
CEN
|
EN
609-1:1999
|
Agricultural
and forestry machinery - Safety of log
splitters - Part 1: Wedge splitters
|
11.06.1999
|
|
CEN
|
EN
609-2:1999
|
Agricultural
and forestry machinery - Safety of log
splitters - Part 2: Screw splitters
|
15.04.2000
|
|
CEN
|
EN
614-1:1995
|
Safety
of machinery - Ergonomic design principles -
Part 1: Terminology and general principles
|
14.02.1996
|
|
CEN
|
EN
614-2:2000
|
Safety
of machinery - Ergonomic design principles -
Part 2: Interactions between the design of
machinery and work tasks.
|
10.03.2001
|
|
CEN
|
EN
617:2001
|
Continuous
handling equipment and systems - Safety and
EMC requirements for the equipment for the
storage of bulk materials in silos, bunkers,
bins and hoppers
|
14.06.2002
|
|
CEN
|
EN
618:2002
|
Continuous
handling equipment and systems - Safety and
EMC requirements for equipment for
mechanical handling of bulk materials except
fixed belt conveyors
|
24.06.2003
|
|
CEN
|
EN
619:2002
|
Continuous
handling equipment and systems – Safety
and EMC requirements for equipment for
mechanical handling of unit loads.
|
14.08.2003
|
|
CEN
|
EN
620:2002
|
Continuous
handling equipment and systems - Safety and
EMC requirements for fixed belt conveyors
for bulk materials
|
24.06.2003
|
|
CEN
|
EN
626-1:1994
|
Safety
of machinery - Reduction of risks to health
from hazardous substances emitted by
machinery - Part 1: Principles and
specifications for machinery manufacturers
|
14.02.1996
|
|
CEN
|
EN
626-2:1996
|
Safety
of machinery - Reduction of risk to health
from hazardous substances emitted by
machinery - Part 2: Methodology leading to
verification procedures
|
28.11.1996
|
|
CEN
|
EN
627:1995
|
Specification
for data logging and monitoring of lifts,
escalators and passenger conveyors
|
28.11.1996
|
|
CEN
|
EN
632:1995
|
Agricultural
machinery - Combine harvesters and forage
harvesters - Safety
|
08.08.1996
|
|
CEN
|
EN
690:1994
|
Agricultural
machinery - Manure spreaders - Safety.
|
01.07.1995
|
|
CEN
|
EN
692:1996
|
Mechanical
presses - Safety
|
05.02.1998
|
|
Warning:
This publication does not concern presses
with full-revolution clutches referred to in
standard EN 692, in paragraphs 5.2.3, 5.3.2,
5.4.6 and 5.5.2, tables 2, 3, 4 and 5 and
Annexes A and B1, in respect of which it
grants no presumption of conformity to the
provisions of Directive 98/37/EC.
|
|
CEN
|
EN
693:2001
|
Machine
tools - Safety - Hydraulic presses.
|
27.11.2001
|
|
CEN
|
EN
704:1999
|
Agricultural
machinery - Pick-up balers - Safety
|
11.06.1999
|
|
CEN
|
EN
706:1996
|
Safety
requirements for agricultural and forestry
machinery - Vine shoot tipping machines
|
22.03.1997
|
|
CEN
|
EN
707:1999
|
Agricultural
machinery - Slurry tankers - Safety
|
05.11.1999
|
|
CEN
|
EN
708:1996
|
Agricultural
machinery - Soil working machines with
powered tools - Safety
|
08.05.1997
|
|
CEN
|
EN
708/A1:2000
|
Agricultural
machinery - Soil working machines with
powered tools - Safety - Amendment 1
|
16.06.2000
|
|
CEN
|
EN
709:1997
|
Agricultural
and forestry machinery - Pedestrian
controlled tractors with mounted rotary
cultivators, motor hoes, motor hoes with
drive wheel(s) - Safety
|
23.10.1997
|
|
CEN
|
EN
709/A1:1999
|
Machinery
for agriculture and forestry - Pedestrian
controlled tractors with mounted rotary
cultivators, motor hoes, motor hoes with
drive wheel(s) - Safety - Amendment 1
|
15.04.2000
|
|
CEN
|
EN
710:1997
|
Safety
requirements for foundry moulding and
coremaking machinery and plant and
associated equipment
|
13.03.1998
|
|
CEN
|
EN
741:2000
|
Continuous
handling equipment and systems - Safety
requirements for systems and their
components for pneumatic handling of bulk
materials.
|
27.11.2001
|
|
CEN
|
EN
745:1999
|
Agricultural
machinery - Rotary mowers and flail-mowers -
Safety
|
11.06.1999
|
|
CEN
|
EN
746-1:1997
|
Industrial
thermoprocessing equipment - Part 1: Common
safety requirements for industrial
thermoprocessing equipment
|
04.06.1997
|
|
CEN
|
EN
746-2:1997
|
Industrial
thermoprocessing equipment - Part 2: Safety
requirements for combustion and fuel
handling systems
|
04.06.1997
|
|
CEN
|
EN
746-3:1997
|
Industrial
thermoprocessing equipment - Part 3: Safety
requirements for the generation and use of
atmosphere gases
|
04.06.1997
|
|
CEN
|
EN
746-4:2000
|
Industrial
thermoprocessing equipment - Part 4:
Particular safety requirements for hot dip
galvanising thermoprocessing equipment
|
16.06.2000
|
|
CEN
|
EN
746-5:2000
|
Industrial
thermoprocessing equipment - Part 5:
Particular safety requirements for salt bath
thermoprocessing equipment.
|
27.11.2001
|
|
CEN
|
EN
746-8:2000
|
Industrial
thermoprocessing equipment - Part 8:
Particular safety requirements for quenching
equipment.
|
27.11.2001
|
|
CEN
|
EN
774:1996
|
Garden
equipment - Hand held, integrally powered
hedge trimmers - Safety
|
15.10.1996
|
|
CEN
|
EN
774/A1:1997
|
Garden
equipment - Hand held, integrally powered
hedge trimmers - Safety - Amendment 1
|
08.05.1997
|
|
CEN
|
EN
774/A2:1997
|
Garden
equipment - Hand held, integrally powered
hedge trimmers - Safety - Amendment 2
|
23.10.1997
|
|
CEN
|
EN
774/A3:2001
|
Garden
equipment - Hand held, integrally powered
hedge trimmers - Safety - Amendment 3
|
27.11.2001
|
|
CEN
|
EN
775:1992
|
Manipulating
industrial robots - Safety (ISO 10218:1992,
modified)
|
25.08.1993
|
|
CEN
|
EN
786:1996
|
Garden
equipment - Electrically powered walk-behind
and lawn edge trimmers - Mechanical safety
|
15.10.1996
|
|
CEN
|
EN
786/A1:2001
|
Garden
equipment - Electrically powered walk-
behind and hand-held lawn trimmers and lawn
edge trimmers - Mechanical safety -
Amendment 1
|
27.11.2001
|
|
CEN
|
EN
791:1995
|
Drill
rigs - Safety
|
08.08.1996
|
|
CEN
|
EN
792-1:2000
|
Hand-held
non-electric power tools - Safety
requirements - Part 1: Assembly power tools
for non-threaded mechanical fasteners.
|
27.11.2001
|
|
CEN
|
EN
792-2:2000
|
Hand-held
non-electric power tools - Safety
requirements - Part 2: Cutting- off and
crimping power tools.
|
27.11.2001
|
|
CEN
|
EN
792-3:2000
|
Hand-held
non-electric power tools - Safety
requirements - Part 3: Drills and tappers.
|
27.11.2001
|
|
CEN
|
EN
792-4:2000
|
Hand-held
non-electric power tools - Safety
requirements - Part 4: Non-rotary percussive
power tools.
|
27.11.2001
|
|
CEN
|
EN
792-5:2000
|
Hand-held
non-electric power tools - Safety
requirements - Part 5: Rotary percussive
drills.
|
27.11.2001
|
|
CEN
|
EN
792-6:2000
|
Hand-held
non-electric power tools - Safety
requirements - Part 6: Assembly power tools
for threaded fasteners.
|
27.11.2001
|
|
CEN
|
EN
792-7:2001
|
Hand-held
non-electric power tools - Safety
requirements - Part 7: Grinders
|
14.06.2002
|
|
CEN
|
EN
792-8:2001
|
Hand-held
non-electric power tools - Safety
requirements - Part 8: Polishers and sanders
|
14.06.2002
|
|
CEN
|
EN
792-9:2001
|
Hand-held
non-electric power tools - Safety
requirements - Part 9: Die grinders
|
14.06.2002
|
|
CEN
|
EN
792-10:2000
|
Hand-held
non-electric power tools - Safety
requirements - Part 10: Compression power
tools.
|
27.11.2001
|
|
CEN
|
EN
792-11:2000
|
Hand-held
non-electric power tools - Safety
requirements - Part 11: Nibblers and shears.
|
27.11.2001
|
|
CEN
|
EN
792-12:2000
|
Hand-held
non-electric power tools - Safety
requirements - Part 12: Small circular,
small oscillating and reciprocating saws.
|
27.11.2001
|
|
CEN
|
EN
792-13:2000
|
Hand-held
non-electric power tools - Safety
requirements - Part 13: Fastener driving
tools.
|
27.11.2001
|
|
CEN
|
EN
809:1998
|
Pumps
and pump units for liquids - Common safety
requirements
|
15.10.1998
|
|
CEN
|
EN
811:1996
|
Safety
of machinery - Safety distances to prevent
danger zones being reached by the lower
limbs
|
08.05.1997
|
|
CEN
|
EN
815:1996
|
Safety
of unshielded tunnel boring machines and
rodless shaft boring machines for rock
|
22.03.1997
|
|
CEN
|
EN
818-1:1996
|
Short
link chain for lifting purposes - Safety -
Part 1: General conditions of acceptance
|
15.10.1996
|
|
CEN
|
EN
818-2:1996
|
Short
link chain for lifting purposes - Safety -
Part 2: Medium tolerance chain for chain
slings - Grade 8
|
28.11.1996
|
|
CEN
|
EN
818-3:1999
|
Short
link chain for lifting purposes - Safety -
Part 3: Medium tolerance chain for chain
slings - Grade 4.
|
10.03.2001
|
|
CEN
|
EN
818-4:1996
|
Short
link chain for lifting purposes - Safety -
Part 4: Chain slings - Grade 8
|
28.11.1996
|
|
CEN
|
EN
818-5:1999
|
Short
link chain for lifting purposes - Safety -
Part 5: Chain slings - Grade 4.
|
10.03.2001
|
|
CEN
|
EN
818-6:2000
|
Short
link chain for lifting purposes - Safety -
Part 6: Chain slings - Specification for
information for use and maintenance to be
provided by the manufacturer.
|
10.03.2001
|
|
CEN
|
EN
818-7:2002
|
Short
link chain for lifting purposes - Safety -
Part 7: Fine tolerance chain for hoists,
Grade T (Types T, DT and DAT)
|
14.06.2002
|
|
CEN
|
EN
836:1997
|
Garden
equipment - Powered lawnmowers - Safety
|
04.06.1997
|
|
CEN
|
EN
836/A1:1997
|
Garden
equipment - Powered lawnmowers - Safety -
Amendment 1
|
13.03.1998
|
|
CEN
|
EN
836/A2:2001
|
Garden
equipment - Powered lawnmowers - Safety -
Amendment 2
|
27.11.2001
|
|
CEN
|
EN
842:1996
|
Safety
of machinery - Visual danger signals -
General requirements, design and testing
|
28.11.1996
|
|
CEN
|
EN
848-1:1998
|
Safety
of woodworking machines - One side moulding
machines with rotating tool - Part 1: Single
spindle vertical moulding machines
|
15.10.1998
|
|
CEN
|
EN
848-1/A1:2000
|
Safety
of woodworking machines - One side moulding
machines with rotating tool - Part 1: Single
spindle vertical moulding machines -
Amendment 1
|
10.03.2001
|
|
CEN
|
EN
848-2:1998
|
Safety
of woodworking machines - One side moulding
machines with rotating tool - Part 2: Single
spindle handfed.integrated fed routing
machines
|
15.10.1998
|
|
CEN
|
EN
848-3:1999
|
Safety
of woodworking machines - One side moulding
machines with rotating tool - Part 3:
Numerical control (NC) boring machines and
routing machines
|
15.04.2000
|
|
CEN
|
EN
859:1997
|
Safety
of woodworking machines - Handfed surface
planing machines
|
13.03.1998
|
|
CEN
|
EN
860:1997
|
Safety
of woodworking machines - One side thickness
planing machines
|
23.10.1997
|
|
CEN
|
EN
861:1997
|
Safety
of woodworking machines - Surface planing
and thicknessing machines
|
13.03.1998
|
|
CEN
|
EN
869:1997
|
Safety
requirements for high pressure metal
diecasting units
|
13.03.1998
|
|
CEN
|
EN
894-1:1997
|
Safety
of machinery - Ergonomics requirements for
the design of displays and control actuators
- Part 1: General principles for human
interactions with displays and control
actuators
|
13.03.1998
|
|
CEN
|
EN
894-2:1997
|
Safety
of machinery - Ergonomics requirements for
the design of displays and control actuators
- Part 2: Displays
|
13.03.1998
|
|
CEN
|
EN
894-3:2000
|
Safety
of machinery - Ergonomics requirements for
the design of displays and control actuators
- Part 3: Control actuators.
|
27.11.2001
|
|
CEN
|
EN
907:1997
|
Agricultural
and forestry machinery - Sprayers and liquid
fertiliser distributors - Safety
|
23.10.1997
|
|
CEN
|
EN
908:1999
|
Agricultural
and forestry machinery - Reel machines for
irrigation - Safety
|
11.06.1999
|
|
CEN
|
EN
909:1998
|
Agricultural
and forestry machinery - Centre pivot and
moving lateral types irrigation machines -
Safety
|
11.06.1999
|
|
CEN
|
EN
930:1997
|
Footwear,
leather and imitation leather goods
manufacturing machines - Roughing, scouring,
polishing and trimming machines - Safety
requirements
|
13.03.1998
|
|
CEN
|
EN
931:1997
|
Footwear
manufacturing machines - Lasting machines -
Safety requirements
|
13.03.1998
|
|
CEN
|
EN
940:1997
|
Safety
of woodworking machines - Combined
woodworking machines
|
23.10.1997
|
|
CEN
|
EN
953:1997
|
Safety
of machinery - Guards - General requirements
for the design and construction of fixed and
movable guards
|
13.03.1998
|
|
CEN
|
EN
954-1:1996
|
Safety
of machinery - Safety-related parts of
control systems - Part 1: General principles
for design
|
08.05.1997
|
|
CEN
|
EN
972:1998
|
Tannery
machines - Reciprocating roller machines -
Safety requirements
|
15.10.1998
|
|
CEN
|
EN
981:1996
|
Safety
of machinery - System of auditory and visual
danger and information signals
|
08.05.1997
|
|
CEN
|
EN
982:1996
|
Safety
of machinery - Safety requirements for fluid
power systems and their components -
Hydraulics
|
15.10.1996
|
|
CEN
|
EN
983:1996
|
Safety
of machinery - Safety requirements for fluid
power systems and their components -
Pneumatics
|
15.10.1996
|
|
CEN
|
EN
996:1995
|
Piling
equipment - Safety requirements
|
15.10.1996
|
|
CEN
|
EN
996/A1:1999
|
Piling
equipment - Safety requirements - Amendment
1
|
11.06.1999
|
|
CEN
|
EN
999:1998
|
Safety
of machinery - The positioning of protective
equipment in respect of approach speeds of
parts of the human body
|
11.06.1999
|
|
CEN
|
EN
1005-1:2001
|
Safety
of machinery - Human physical performance -
Part 1: Terms and definitions
|
14.06.2002
|
|
CEN
|
EN
1005-3:2002
|
Safety
of machinery - Human physical performance -
Part 3: Recommended force limits for
machinery operation
|
14.06.2002
|
|
CEN
|
EN
1010-3:2002
|
Safety
of machinery – Safety requirements for the
design and construction of printing and
paper converting machines – Part 3:
Cutting machines
|
14.08.2003
|
|
CEN
|
EN
1012-1:1996
|
Compressors
and vacuum pumps - Safety requirements -
Part 1: compressors
|
15.10.1996
|
|
CEN
|
EN
1012-2:1996
|
Compressors
and vacuum pumps - Safety requirements -
Part 2: Vacuum Pumps
|
15.10.1996
|
|
CEN
|
EN
1028-1:2002
|
Fire-fighting
pumps – Fire-fighting centrifugal pumps
with primer – Part 1: Classification –
General and safety requirements
|
14.08.2003
|
|
CEN
|
EN
1028-2:2002
|
Fire-fighting
pumps – Fire-fighting centrifugal pumps
with primer – Part 2: Verification of
general and safety requirements
|
14.08.2003
|
|
CEN
|
EN
1032:1996
|
Mechanical
vibration - Testing of mobile machinery in
order to determine the whole-body vibration
emission value - General
|
22.03.1997
|
|
CEN
|
EN
1032/A1:1998
|
Mechanical
vibration - Testing of mobile machinery in
order to determine the whole-body vibration
emission value - General - Amendment 1
|
11.06.1999
|
|
CEN
|
EN
1033:1995
|
Hand-arm
vibration - Laboratory measurement of
vibration at the grip surface of hand-guided
machinery - General
|
14.02.1996
|
|
CEN
|
EN
1034-3:1999
|
Safety
of machinery - Safety requirements for the
design and construction of paper making and
finishing machines - Part 3: Winders and
slitters, plying machines
|
20.05.2000
|
|
CEN
|
EN
1037:1995
|
Safety
of machinery - Prevention of unexpected
start-up
|
15.10.1996
|
|
CEN
|
EN
1050:1996
|
Safety
of machinery - principles for risk
assessment
|
23.10.1997
|
|
CEN
|
EN
1088:1995
|
Safety
of machinery - Interlocking devices
associated with guards - Principles for
design and selection
|
15.10.1996
|
|
CEN
|
EN
1093-1:1998
|
Safety
of machinery - Evaluation of the emission of
airborne hazardous substances - Part 1:
Selection of test methods
|
14.11.1998
|
|
CEN
|
EN
1093-3:1996
|
Safety
of machinery - Evaluation of the emission of
airborne hazardous substances - Part 3:
Emission rate of a specified pollutant -
Bench test method using the real pollutant
|
15.10.1996
|
|
CEN
|
EN
1093-4:1996
|
Safety
of machinery - Evaluation of the emission of
airborne hazardous substances - Part 4:
Capture efficiency of an exhaust system -
Tracer method
|
15.10.1996
|
|
CEN
|
EN
1093-6:1998
|
Safety
of machinery - Evaluation of the emission of
airborne hazardous substances - Part 6:
Separation efficiency by mass, unducted
outlet
|
14.11.1998
|
|
CEN
|
EN
1093-7:1998
|
Safety
of machinery - Evaluation of the emission of
airborne hazardous substances - Part 7:
Separation efficiency by mass, ducted outlet
|
14.11.1998
|
|
CEN
|
EN
1093-8:1998
|
Safety
of machinery - Evaluation of the emission of
airborne hazardous substances - Part 8:
Pollutant concentration parameter, test
bench method
|
14.11.1998
|
|
CEN
|
EN
1093-9:1998
|
Safety
of machinery - Evaluation of the emission of
airborne hazardous substances - Part 9:
Pollutant concentration parameter, room
method
|
14.11.1998
|
|
CEN
|
EN
1093-11:2001
|
Safety
of machinery - Evaluation of the emission of
airborne hazardous substances - Part 11 :
Decontamination index
|
14.06.2002
|
|
CEN
|
EN
1114-1:1996
|
Rubber
and plastics machines - Extruders and
extrusion lines - Part 1: Safety
requirements for extruders
|
08.05.1997
|
|
CEN
|
EN
1114-2:1998
|
Rubber
and plastics machines - Extruders and
extrusion lines - Part 2: Safety
requirements for die face pelletisers
|
15.10.1998
|
|
CEN
|
EN
1114-3:2001
|
Rubber
and plastics machines - Extruders and
extrusion lines - Part 3: Safety
requirements for haul-offs.
|
27.11.2001
|
|
CEN
|
EN
1127-1:1997
|
Explosive
atmospheres - Explosion prevention and
protection - Part 1: Basic concepts and
methodology
|
13.03.1998
|
|
CEN
|
EN
1152:1994
|
Tractors
and machinery for agriculture and forestry -
Guards for power take-off (PTO) drive shafts
- Wear and strength tests.
|
01.07.1995
|
|
CEN
|
EN
1175-1:1998
|
Safety
of industrial trucks - Electrical
requirements - Part 1: General requirements
for battery powered trucks
|
15.10.1998
|
|
CEN
|
EN
1175-2:1998
|
Safety
of industrial trucks - Electrical
requirements - Part 2: General requirements
of internal combustion engine powered trucks
|
13.06.1998
|
|
CEN
|
EN
1175-3:1998
|
Safety
of industrial trucks - Electrical
requirements - Part 3: Specific requirements
for the electric power transmission systems
of internal combustion engine powered trucks
|
15.10.1998
|
|
CEN
|
EN
1218-1:1999
|
Safety
of woodworking machines - Tenoning machines
- Part 1: Single end tenoning machines with
sliding table.
|
10.03.2001
|
|
CEN
|
EN
1218-3:2001
|
Safety
of woodworking machines - Tenoning machines
- Part 3 : Hand fed tenoning machines with
sliding table for cutting structural timbers
|
14.06.2002
|
|
CEN
|
EN
1248:2001
|
Foundry
machinery - Safety requirements for abrasive
blasting equipment
|
14.06.2002
|
|
CEN
|
EN
1265:1999
|
Noise
test code for foundry machines and equipment
|
15.04.2000
|
|
CEN
|
EN
1299:1997
|
Mechanical
vibration and shock - Vibration isolation of
machines - Information for the application
of source isolation
|
04.06.1997
|
|
CEN
|
EN
1374:2000
|
Agricultural
machinery - Silo stationary unloaders for
round silos - Safety.
|
10.03.2001
|
|
CEN
|
EN
1398:1997
|
Dock
levellers
|
13.03.1998
|
|
CEN
|
EN
1417:1996
|
Rubber
and plastics machines - Two-roll mills -
Safety requirements
|
22.03.1997
|
|
CEN
|
EN
1454:1997
|
Portable,
hand-held, internal combustion cutting-off
machines - Safety
|
13.03.1998
|
|
CEN
|
EN
1459:1998
|
Safety
of industrial trucks - Self-propelled
variable reach trucks
|
30.05.2000
|
|
Warning:
"Users of the standard EN 1459 are
informed that the standard does not cover
the risks to which the operator is exposed
in the event of the truck accidentally
tipping over. The standard does not give a
presumption of conformity in that
respect."
|
|
CEN
|
EN
1492-1:2000
|
Textile
slings - Safety - Part 1: Specification for
flat woven webbing slings, made of man-made
fibres, for general purpose use.
|
27.11.2001
|
|
CEN
|
EN
1492-2:2000
|
Textile
slings - Safety - Part 2: Specification for
roundslings , made of man-made fibres, for
general purpose use.
|
27.11.2001
|
|
CEN
|
EN
1493:1998
|
Vehicle
lifts
|
11.06.1999
|
|
CEN
|
EN
1494:2000
|
Mobile
or movable jacks and associated lifting
equipment.
|
27.11.2001
|
|
CEN
|
EN
1495:1997
|
Lifting
platforms - Mast climbing work platforms
|
13.03.1998
|
|
Warning:
"This publication does not concern
paragraph 5.3.2.4, the last subparagraph of
7.1.2.12, table 8 and figure 9 of standard
EN 1495:1997, in respect of which it grants
no presumption of conformity to the
provisions of Directive 98/37/EC."
|
|
CEN
|
EN
1501-1:1998
|
Refuse
collection vehicles and their associated
lifting devices - General requirements and
safety requirements - Part 1: Rear-end
loaded refuse collection vehicles
|
15.10.1998
|
|
CEN
|
EN
1525:1997
|
Safety
of industrial trucks - Driverless trucks and
their systems
|
13.03.1998
|
|
CEN
|
EN
1526:1997
|
Safety
of industrial trucks - Additional
requirements for automated functions on
trucks
|
13.03.1998
|
|
CEN
|
EN
1539:2000
|
Dryers
and ovens, in which flammable substances are
released - Safety requirements.
|
27.11.2001
|
|
CEN
|
EN
1547:2001
|
Industrial
thermoprocessing equipment - Noise test code
for industrial thermoprocessing equipment
including its ancillary handling equipment
|
14.06.2002
|
|
CEN
|
EN
1550:1997
|
Machine-tools
safety - Safety requirements for the design
and construction of work holding chucks
|
13.03.1998
|
|
CEN
|
EN
1551:2000
|
Safety
of industrial trucks - Self-propelled trucks
over 10 000 kg capacity
|
14.06.2002
|
|
CEN
|
EN
1553:1999
|
Agricultural
machinery - Agricultural self-propelled,
mounted, semi-mounted and trailed machines -
Common safety requirements
|
15.04.2000
|
|
CEN
|
EN
1570:1998
|
Safety
requirements for lifting tables
|
15.10.1998
|
|
CEN
|
EN
1612-1:1997
|
Rubber
and plastics machines - Reaction moulding
machines - Part 1: Safety requirements for
metering and mixing units
|
13.03.1998
|
|
CEN
|
EN
1612-2:2000
|
Rubber
and plastics machines - Reaction moulding
machines - Part 2: Safety requirements for
reaction moulding plant.
|
10.03.2001
|
|
CEN
|
EN
1672-2:1997
|
Food
processing machinery - Basic concepts - Part
2: Hygiene requirements
|
23.10.1997
|
|
CEN
|
EN
1673:2000
|
Food
processing machinery - Rotary rack ovens -
Safety and hygiene requirements.
|
27.11.2001
|
|
CEN
|
EN
1674:2000
|
Food
processing machinery -Dough and pastry
brakes - Safety and hygiene requirements.
|
27.11.2001
|
|
CEN
|
EN
1677-1:2000
|
Components
for slings - Safety - Part 1: Forged steel
components, Grade 8
|
14.06.2002
|
|
CEN
|
EN
1677-2:2000
|
Components
for slings - Safety - Part 2: Forged steel
lifting hooks with latch, Grade 8
|
14.06.2002
|
|
CEN
|
EN
1677-3:2001
|
Components
for slings - Safety - Part 3: Forged steel
self-locking hooks - Grade 8
|
14.06.2002
|
|
CEN
|
EN
1677-4:2000
|
Components
for slings - Safety - Part 4: Links, Grade
8.
|
27.11.2001
|
|
CEN
|
EN
1677-5:2001
|
Components
for slings - Safety - Part 5: Forged steel
lifting hooks with latch - Grade 4.
|
27.11.2001
|
|
CEN
|
EN
1677-6:2001
|
Components
for slings - Safety - Part 6: Links - Grade
4.
|
27.11.2001
|
|
CEN
|
EN
1678:1998
|
Food
processing machinery - Vegetable cutting
machines - Safety and hygiene requirements
|
15.10.1998
|
|
CEN
|
EN
1679-1:1998
|
Reciprocating
internal combustion engines - Safety - Part
1: Compression ignition engines
|
13.06.1998
|
|
CEN
|
EN
1726-1:1999
|
Safety
of industrial trucks - Self-propelled trucks
up to and including 10 000 kg capacity and
industrial tractors with a drawbar pull up
to and including 20 000 N - Part 1 : General
requirements
|
30.05.2000
|
|
Warning:
"Users of the standard EN 1726-1 are
informed that the standard does not cover
the risks to which the operator is exposed
in the event of the truck accidentally
tipping over. The standard does not give a
presumption of conformity in that
respect."
|
|
CEN
|
EN
1726-2:2000
|
Safety
of industrial trucks - Self –propelled
trucks up to and including 10 000 kg
capacity and tractors with a drawbar pull up
to and including 20 000 N - Part 2:
Additional requirements for trucks with
elevating operator position and trucks
specifically designed to travel with
elevated loads.
|
27.11.2001
|
|
CEN
|
EN
1755:2000
|
Safety
of Industrial Trucks - Operation in
potentially explosive atmospheres - Use in
flammable gas, vapour mist and dust.
|
10.03.2001
|
|
CEN
|
EN
1756-1:2001
|
Tail
lifts - Platform lifts for mounting on
wheeled vehicles - Safety requirements -
Part 1: Tail lifts for goods
|
14.06.2002
|
|
CEN
|
EN
1757-1:2001
|
Safety
of industrial trucks - Pedestrian controlled
trucks - Part 1: Stacker trucks
|
14.06.2002
|
|
CEN
|
EN
1757-2:2001
|
Safety
of industrial trucks - Pedestrian controlled
trucks - Part 2 : Pallet trucks
|
14.06.2002
|
|
CEN
|
EN
1760-1:1997
|
Safety
of machinery - Pressure sensitive protective
devices - Part 1: General principles for the
design and testing of pressure sensitive
mats and pressure sensitive floors
|
13.03.1998
|
|
CEN
|
EN
1760-2:2001
|
Safety
of machinery - Pressure sensitive protective
devices - Part 2: General principles for the
design and testing of pressure sensitive
edges and pressure sensitive bars.
|
27.11.2001
|
|
CEN
|
EN
1804-1:2001
|
Machines
for underground mines - Safety requirements
for hydraulic powered roof supports - Part
1: Support units and general requirements
|
24.06.2003
|
|
CEN
|
EN
1804-2:2001
|
Machines
for underground mines - Safety requirements
for hydraulic powered roof supports - Part
2: Power set legs and rams
|
24.06.2003
|
|
CEN
|
EN
1807:1999
|
Safety
of woodworking machines - Band sawing
machines.
|
27.11.2001
|
|
CEN
|
EN
1808:1999
|
Safety
requirements on suspended access equipment -
Design calculations, stability criteria,
construction - Tests
|
05.11.1999
|
|
CEN
|
EN
1834-2:2000
|
Reciprocating
internal combustion engines - Safety
requirements for design and construction of
engines for use in potentially explosive
atmospheres - Part 2: Group I engines for
use in underground workings susceptible to
firedamp and/or combustible dust.
|
10.03.2001
|
|
CEN
|
EN
1837:1999
|
Safety
of machinery - Integral lighting of machines
|
11.06.1999
|
|
CEN
|
EN
1845:1998
|
Footwear
manufacturing machines - Footwear moulding
machines - Safety requirements
|
11.06.1999
|
|
CEN
|
EN
1846-2:2001
|
Firefighting
and rescue service vehicles - Part 2 :
Common requirements - Safety and performance
|
14.06.2002
|
|
CEN
|
EN
1846-3:2002
|
Firefighting
and rescue service vehicles – Part 3:
Permanently installed equipment – Safety
and performance
|
14.08.2003
|
|
CEN
|
EN
1853:1999
|
Agricultural
machinery - Trailers with tipping body -
Safety
|
05.11.1999
|
|
CEN
|
EN
1870-1:1999
|
Safety
of woodworking machines - Circular sawing
machines - Part 1: Circular saw benches
(with and without sliding table) and
dimension saws.
|
10.03.2001
|
|
CEN
|
EN
1870-3:2001
|
Safety
of woodworking machines - Circular sawing
machines - Part 3: Down cutting cross-cut
saws and dual purpose down cutting.circular
saw benches
|
14.06.2002
|
|
CEN
|
EN
1870-4:2001
|
Safety
of woodworking machines - Circular sawing
machines - Part 4: Single and multi-blade
rip sawing machines with manual loading
and/or unloading
|
14.06.2002
|
|
CEN
|
EN
1870-5:2002
|
Safety
of woodworking machines - Circular sawing
machines - Part 5: Circular sawbenches/up-cutting
cross-cut sawing machines
|
24.06.2003
|
|
CEN
|
EN
1870-6:2002
|
Safety
of woodworking machines - Circular sawing
machines - Part 6: Circular sawing machines
for firewood and dual purpose circular
sawing machines for firewood/circular saw
benches, with manual loading and/or
unloading
|
24.06.2003
|
|
CEN
|
EN
1870-7:2001
|
Safety
of woodworking machines - Circular sawing
machines - Part 7: Circular log sawing
machine with integrated feeding table and
manual loading and/or unloading
|
14.06.2002
|
|
CEN
|
EN
1870-8:2001
|
Safety
of woodworking machines - Circular sawing
machines - Part 8: Single blade edging
circular rip sawing machines with power
driven saw unit and manual loading and/or
unloading
|
14.06.2002
|
|
CEN
|
EN
1870-9:2000
|
Safety
of woodworking machines - Circular sawing
machines - Part 9: Double blade circular
sawing machines for cross-cutting with
integrated feed and with manual loading
and/or unloading.
|
27.11.2001
|
|
CEN
|
EN
1915-1:2001
|
Aircraft
ground support equipment - General
requirements - Part 1 : Basic safety
requirements
|
14.06.2002
|
|
CEN
|
EN
1915-2:2001
|
Aircraft
ground support equipment - General
requirements - Part 2 : Stability and
strength requirements, calculations and test
methods
|
14.06.2002
|
|
CEN
|
EN
1953:1998
|
Atomising
and spraying equipment for coating materials
- Safety requirements
|
14.11.1998
|
|
CEN
|
EN
1974:1998
|
Food
processing machinery - Slicing machines -
Safety and hygiene requirements
|
15.10.1998
|
|
CEN
|
EN
ISO 2860:1999
|
Earth-moving
machinery - Minimum access dimensions (ISO
2860:1992)
|
05.11.1999
|
|
CEN
|
EN
ISO 2867:1998
|
Earth-moving
machinery - Access systems (ISO 2867:1994)
|
14.11.1998
|
|
CEN
|
EN
ISO 3164:1999
|
Earth-moving
machinery - Laboratory evaluations of
protective structures - Specifications for
deflection-limiting volume (ISO 3164:1995)
|
05.11.1999
|
|
CEN
|
EN
ISO 3411:1999
|
Earth-moving
machinery - Human physical dimensions of
operators and minimum operator space
envelope (ISO 3411:1995)
|
05.11.1999
|
|
CEN
|
EN
ISO 3450:1996
|
Earth-moving
machinery - Braking systems of rubber-tyred
machines - Performance requirements and test
procedures (ISO 3450:1995)
|
15.10.1996
|
|
CEN
|
EN
ISO 3457:1995
|
Earth-moving
machinery - Guards and shields - Definitions
and specifications (ISO 3457:1986)
|
08.08.1996
|
|
CEN
|
EN
ISO 3741:1999
|
Acoustics
- Determination of sound power levels of
noise sources using sound pressure -
Precision methods for reverberation rooms
(ISO 3741:1999)
|
24.06.2003
|
|
CEN
|
EN
ISO 3743-1:1995
|
Acoustics
- Determination of sound power levels of
noise sources - Engineering methods for
small, movable sources in reverberant fields
- Part 1 : Comparison method for hard-walled
test rooms (ISO 3743-1:1994)
|
08.08.1996
|
|
CEN
|
EN
ISO 3743-2:1996
|
Acoustics
- Determination of sound power levels of
noise sources using sound pressure -
Engineering methods for small, movable
sources in reverberant fields - Part 2 :
Methods for special reverberation test rooms
(ISO 3743-2:1994)
|
28.11.1996
|
|
CEN
|
EN
ISO 3744:1995
|
Acoustics
- Determination of sound power levels of
noise sources using sound pressure -
Engineering method in an essentially free
field over a reflecting plane (ISO
3744:1994).
|
14.02.1996
|
|
CEN
|
EN
ISO 3746:1995
|
Acoustics
- Determination of sound power levels of
noise sources using sound pressure - Survey
method using an enveloping measurement
surface over a reflecting plane (ISO
3746:1995).
|
14.02.1996
|
|
CEN
|
EN
ISO 3747:2000
|
Acoustics
– Determination of sound power levels of
noise sources using sound pressure –
Comparison method for use in situ
(ISO 3747:2000)
|
14.08.2003
|
|
CEN
|
EN
ISO 4871:1996
|
Acoustics
- Declaration and verification of noise
emission values of machinery and equipment
(ISO 4871:1996)
|
08.05.1997
|
|
CEN
|
EN
ISO 6682:1995
|
Earth-moving
machinery - Zones of comfort and reach for
controls (ISO 6682:1986 including Amendment
1:1989)
|
08.08.1996
|
|
CEN
|
EN
ISO 6683:1999
|
Earth-moving
machinery - Seat belts and seat belt
anchorages (ISO 6683:1981 + Amendment
1:1990)
|
05.11.1999
|
|
CEN
|
EN
ISO 7096:2000
|
Earth-moving
machinery - Laboratory evaluation of
operator seat vibration(ISO 7096:2000)
|
14.06.2002
|
|
CEN
|
EN
ISO 7235:1995
|
Acoustics
- Measurement procedures for ducted
silencers - Insertion loss, flow noise and
total pressure loss (ISO 7235:1991)
|
15.10.1996
|
|
CEN
|
EN
ISO 7250:1997
|
Basic
human body measurements for technological
design (ISO 7250: 1996)
|
13.03.1998
|
|
CEN
|
EN
ISO 8230:1997
|
Safety
requirements for dry-cleaning machines using
perchloroethylene (ISO 8230:1997)
|
13.06.1998
|
|
CEN
|
EN
ISO 8662-4:1995
|
Hand-held
portable power tools - Measurement of
vibrations at the handle - Part 4 : Grinders
(ISO 8662-4:1994)
|
08.08.1996
|
|
CEN
|
EN
ISO 8662-6:1995
|
Hand-held
portable power tools - Measurement of
vibrations at the handle - Part 6 : Impact
drills (ISO 8662-6:1994).
|
14.02.1996
|
|
CEN
|
EN
ISO 8662-7:1997
|
Hand-held
portable power tools - Measurement of
vibrations at the handle - Part 7: Wrenches,
screwdrivers and nut runners with impact,
impulse or ratchet action (ISO 8662-7:1997)
|
13.03.1998
|
|
CEN
|
EN
ISO 8662-8:1997
|
Hand-held
portable power tools - Measurement of
vibrations at the handle - Part 8: Polishers
and rotary, orbital and random orbital
sanders (ISO 8662-8:1997)
|
13.03.1998
|
|
CEN
|
EN
ISO 8662-9:1996
|
Hand-held
portable power tools - Measurement of
vibrations at the handle - Part 9: Rammers
(ISO 8662-9:1996)
|
08.05.1997
|
|
CEN
|
EN
ISO 8662-10:
1998
|
Hand-held
portable power tools - Measurement of
vibrations at the handle - Part 10: Nibblers
and shears (ISO 8662-10:1998)
|
24.06.2003
|
|
CEN
|
EN
ISO 8662-12:
1997
|
Hand-held
portable power tools - Measurement of
vibrations at the handle - Part 12: Saws and
files with reciprocating action and saws
with oscillating or rotating action (ISO
8662-12:1997)
|
13.03.1998
|
|
CEN
|
EN
ISO 8662-13:
1997
|
Hand-held
portable power tools - Measurement of
vibrations at the handle - Part 13: Die
grinders (ISO 8662-13:1997)
|
13.03.1998
|
|
CEN
|
EN
ISO 8662-14:
1996
|
Hand-held
portable power tools - Measurement of
vibrations at the handle - Part 14:
Stone-working tools and needle scalers (ISO
8662-14:1996)
|
08.05.1997
|
|
CEN
|
EN
ISO 9614-1:1995
|
Acoustics
- Determination of sound power levels of
noise sources using sound intensity - Part
1: Measurement at discrete points (ISO
9614-1:1993)
|
08.08.1996
|
|
CEN
|
EN
ISO 9614-3:2002
|
Acoustics
– Determination of sound power levels of
noise sources using sound intensity – Part
3: Precision method for measurement by
scanning (ISO 9614-3:2002)
|
14.08.2003
|
|
CEN
|
EN
ISO 9902-1:2001
|
Textile
machinery - Noise test code - Part 1: Common
requirements (ISO 9902-1:2001).
|
27.11.2001
|
|
CEN
|
EN
ISO 9902-2:2001
|
Textile
machinery - Noise test code - Part 2:
Spinning preparatory and spinning machinery
(ISO 9902-2:2001).
|
27.11.2001
|
|
CEN
|
EN
ISO 9902-3:2001
|
Textile
machinery - Noise test code - Part 3:
Nonwoven machinery (ISO 9902-3:2001).
|
27.11.2001
|
|
CEN
|
EN
ISO 9902-4:2001
|
Textile
machinery - Noise test code - Part 4: Yarn
processing, cordage and rope manufacturing
machinery (ISO 9902-4:2001).
|
27.11.2001
|
|
CEN
|
EN
ISO 9902-5:2001
|
Textile
machinery - Noise test code - Part 5:
Weaving and knitting preparatory machinery
(ISO 9902-5:2001).
|
27.11.2001
|
|
CEN
|
EN
ISO 9902-6:2001
|
Textile
machinery - Noise test code - Part 6: Fabric
manufacturing machinery (ISO 9902-6:2001).
|
27.11.2001
|
|
CEN
|
EN
ISO 9902-7:2001
|
Textile
machinery - Noise test code - Part 7: Dyeing
and finishing machinery (ISO 9902-7:2001).
|
27.11.2001
|
|
CEN
|
EN
ISO 10472-1:
1997
|
Safety
requirements for industrial laundry
machinery - Part 1: Common requirements (ISO
10472-1:1997)
|
13.06.1998
|
|
CEN
|
EN
ISO 10472-2:
1997
|
Safety
requirements for industrial laundry
machinery - Part 2: Washing machines and
washer-extractors (ISO 10472-2:1997)
|
13.06.1998
|
|
CEN
|
EN
ISO 10472-3:
1997
|
Safety
requirements for industrial laundry
machinery - Part 3: Washing tunnel lines
including component machines (ISO 10472
-3:1997)
|
13.06.1998
|
|
CEN
|
EN
ISO 10472-4:
1997
|
Safety
requirements for industrial laundry
machinery - Part 4: Air dryers (ISO
10472-4:1997)
|
13.06.1998
|
|
CEN
|
EN
ISO 10472-5:
1997
|
Safety
requirements for industrial laundry
machinery - Part 5: Flatwork ironers,
feeders and folders (ISO 10472-5:1997)
|
13.06.1998
|
|
CEN
|
EN
ISO 10472-6:
1997
|
Safety
requirements for industrial laundry
machinery - Part 6: Ironing and fusing
presses (ISO 10472-6:1997)
|
13.06.1998
|
|
CEN
|
EN
ISO 11102-1:
1997
|
Reciprocating
internal combustion engines - Handle
starting equipment - Part 1: Safety
requirements and tests (ISO 11102-1:1997)
|
13.03.1998
|
|
CEN
|
EN
ISO 11102-2:
1997
|
Reciprocating
internal combustion engines - Handle
starting equipment - Part 2: Method of
testing the angle of disengagement (ISO
11102-2:1997)
|
13.03.1998
|
|
CEN
|
EN
ISO 11111:1995
|
Safety
requirements for textile machinery (ISO
11111:1995)
|
08.08.1996
|
|
CEN
|
EN
ISO 11145:2001
|
Optics
and optical instruments - Lasers and laser
related equipment - Vocabulary and symbols
(ISO 11145:2001)
|
14.06.2002
|
|
CEN
|
EN
ISO 11200:1995
|
Acoustics
- Noise emitted by machinery and equipment -
Guidelines for the use of basic standards
for the determination of emission sound
pressure levels at a work station and at
other specified positions (ISO 11200:1995)
|
15.10.1996
|
|
CEN
|
EN
ISO 11201:1995
|
Acoustics
- Noise emitted by machinery and equipment -
Measurement of emission sound pressure
levels at a work station and at other
specified positions - Engineering method in
an essentially free field over a reflecting
plane (ISO 11201:1995)
|
15.10.1996
|
|
CEN
|
EN
ISO 11202:1995
|
Acoustics
- Noise emitted by machinery and equipment -
Measurement of emission sound pressure
levels at a work station and at other
specified positions - Survey method in situ
(ISO 11202:1995)
|
15.10.1996
|
|
CEN
|
EN
ISO 11203:1995
|
Acoustics
- Noise emitted by machinery and equipment -
Determination of emission sound pressure
levels at a work station and at other
specified positions from the sound power
level (ISO 11203:1995)
|
15.10.1996
|
|
CEN
|
EN
ISO 11204:1995
|
Acoustics
- Noise emitted by machinery and equipment -
Measurement of emission sound pressure
levels at a work station and at other
specified positions - Method requiring
environmental corrections (ISO 11204:1995)
|
15.10.1996
|
|
CEN
|
EN
ISO 11546-1:
1995
|
Acoustics
- Determination of sound insulation
performances of enclosures - Part 1:
Measurements under laboratory conditions
(for declaration purposes) (ISO
11546-1:1995)
|
15.10.1996
|
|
CEN
|
EN
ISO 11546-2:
1995
|
Acoustics
- Determination of sound insulation
performances of enclosures - Part 2:
Measurements in situ for acceptance and
verification purposes (ISO 11546-2:1995)
|
15.10.1996
|
|
CEN
|
EN
ISO 11554:1998
|
Optics
and optical instruments - Lasers and
laser-related equipment - Test methods for
laser beam power, energy and temporal
characteristics (ISO 11554:1998)
|
11.06.1999
|
|
CEN
|
EN
ISO 11680-1:
2000
|
Machinery
of forestry - Safety requirements and
testing for pole-mounted powered pruners -
Part 1 : Units fitted with an integral
combustion engine (ISO 11680-1:2000)
|
14.06.2002
|
|
CEN
|
EN
ISO 11680-2:
2000
|
Machinery
of forestry - Safety requirements and
testing for the pole-mounted powered pruners
- Part 2 : Units for use with an independent
or back power source (ISO 11680-2:2000)
|
14.06.2002
|
|
CEN
|
EN
ISO 11681-2:
1998
|
Machinery
for forestry - Portable chain-saws - Safety
requirements and testing - Part 2:
Chain-saws for tree service (ISO
11681-2:1998)
|
15.10.1998
|
|
CEN
|
EN
ISO 11688-1:
1998
|
Acoustics
- Recommended practice for the design of
low-noise machinery and equipment - Part 1:
Planning (ISO.TR 11688-1:1995)
|
15.10.1998
|
|
CEN
|
EN
ISO 11691:1995
|
Acoustics
- Measurement of insertion loss of ducted
silencers without flow - Laboratory survey
method (ISO 11691:1995)
|
14.02.1996
|
|
CEN
|
EN
ISO 11806:1997
|
Agricultural
and forestry machinery - Portable hand-held
combustion engine driven brush cutters and
grass trimmers - Safety (ISO 11806:1997)
|
23.10.1997
|
|
CEN
|
EN
ISO 11957:1996
|
Acoustics
- Determination of sound insulation
performance of cabins - Laboratory and in
situ measurements (ISO 11957:1996)
|
08.05.1997
|
|
CEN
|
EN
ISO 12001:1996
|
Acoustics
- Noise emitted by machinery and equipment -
Rules for the drafting and presentation of a
noise test code (ISO 12001:1996)
|
08.05.1997
|
|
CEN
|
EN
12012-1:2000
|
Rubber
and plastics machines - Size reduction
machines - Part 1: Safety requirements for
blade granulators.
|
27.11.2001
|
|
CEN
|
EN
12012-2:2001
|
Rubber
and plastics machines - Safety - Size
reduction machines - Requirements for the
design and construction - Part 2: Safety
requirements for strand pelletizers
|
14.06.2002
|
|
CEN
|
EN
12012-3:2001
|
Rubber
and plastics machines - Size reduction
machines - Part 3: Safety requirements for
shredders.
|
27.11.2001
|
|
CEN
|
EN
12013:2000
|
Rubber
and plastics machines - Internal mixers -
Safety requirements.
|
27.11.2001
|
|
CEN
|
EN
12016:1998
|
Electromagnetic
compatibility - Product family standard for
lifts, escalators and passenger conveyors -
Immunity.
|
10.03.2001
|
|
CEN
|
EN
12041:2000
|
Food
processing machinery - Moulders - Safety and
hygiene requirements.
|
10.03.2001
|
|
CEN
|
EN
12043:2000
|
Food
processing machinery - Intermediate provers
- Safety and hygiene requirements.
|
27.11.2001
|
|
CEN
|
EN
12053:2001
|
Safety
of industrial trucks - Test methods for
measuring noise emissions
|
14.06.2002
|
|
CEN
|
EN
12077-2:1998
|
Cranes
safety - Requirements for health and safety
- Part 2: Limiting and indicating devices
|
11.06.1999
|
|
CEN
|
EN
12110:2002
|
Tunnelling
machines - Air locks - Safety requirements
|
14.08.2003
|
|
CEN
|
EN
12111:2002
|
Tunnelling
machines - Road headers, continuous miners
and impact rippers - Safety requirements
|
14.08.2003
|
|
CEN
|
EN
12158-1:2000
|
Builders
hoists for the transport of goods - Part 1:
Hoists with accessible platforms
|
14.06.2002
|
|
CEN
|
EN
12158-2:2000
|
Builders
hoists goods - Part 2: Inclined hoists with
non-accessible load carrying devices.
|
27.11.2001
|
|
CEN
|
EN
12162:2001
|
Liquid
pumps - Safety requirements - Procedure for
hydrostatic testing
|
14.06.2002
|
|
CEN
|
EN
12198-1:2000
|
Safety
of machinery - Assessment and reduction of
risks arising from radiation emitted by
machinery - Part 1: General principles.
|
10.03.2001
|
|
CEN
|
EN
12198-2:2002
|
Safety
of machinery - Assessment and reduction of
risks arising from radiation emitted by
machinery – Part 2: Radiation emission
measurement procedure
|
14.08.2003
|
|
CEN
|
EN
12198-3:2002
|
Safety
of machinery - Assessment and reduction of
risks arising from radiation emitted by
machinery – Part 3: Reduction of radiation
by attenuation or screening
|
14.08.2003
|
|
CEN
|
EN
12254:1998 +
EN
12254/A1:2002
|
Screens
for laser working places – Safety
requirements and testing
|
14.08.2003
|
|
CEN
|
EN
12301:2000
|
Rubber
and plastics machines - Calenders - Safety
requirements.
|
27.11.2001
|
|
CEN
|
EN
12312-1:2001
|
Aircraft
ground support equipment - Specific
requirements - Part 1: Passenger stairs
|
14.06.2002
|
|
CEN
|
EN
12312-2:2002
|
Aircraft
ground support equipment — Specific
requirements — Part 2: Catering
vehicles
|
14.08.2003
|
|
CEN
|
EN
12312-12:2002
|
Aircraft
ground support equipment - Specific
requirements - Part 12: Potable water
service equipment
|
14.08.2003
|
|
CEN
|
EN
12312-13:2002
|
Aircraft
ground support equipment - Specific
requirements - Part 13: Lavatory service
equipment
|
14.08.2003
|
|
CEN
|
EN
12348:2000
|
Core
drilling machines on stand - Safety.
|
10.03.2001
|
|
CEN
|
EN
12355:2003
|
Food
processing machinery – Derinding-,
skinning- and membrane removal machines –
Safety and hygiene requirements
|
14.08.2003
|
|
CEN
|
EN
12385-1:2002
|
Steel
wire ropes – Safety – Part 1: General
requirements
|
14.08.2003
|
|
CEN
|
EN
12385-2:2002
|
Steel
wire ropes – Safety – Part 2:
Definitions, designations and classification
|
14.08.2003
|
|
CEN
|
EN
12385-4:2002
|
Steel
wire ropes – Safety – Part 4: Stranded
ropes for general lifting applications
|
14.08.2003
|
|
CEN
|
EN
12409:1999
|
Rubber
and plastics machines - Thermoforming
machines - Safety requirements
|
15.04.2000
|
|
CEN
|
EN
12415:2000
|
Machine
tools - Safety - Small numerically
controlled turning machines and turning
centres.
|
27.11.2001
|
|
CEN
|
EN
12415/A1: 2002
|
Safety
of machine tools – Small numerically
controlled turning machines and turning
centres - Amendment 1
|
14.08.2003
|
|
CEN
|
EN
12417:2001
|
Machine
tools - Safety - Machining centres
|
14.06.2002
|
|
CEN
|
EN
12418:2000
|
Masonry
and stone cutting-off machines for job site
- Safety.
|
27.11.2001
|
|
CEN
|
EN
12478:2000
|
Safety
of machine tools - Large numerically
controlled turning machines and turning
centres.
|
27.11.2001
|
|
CEN
|
EN
12505:2000
|
Food
processing machinery - Centrifugal machines
for processing edible oils and fats - Safety
and hygiene requirements.
|
27.11.2001
|
|
CEN
|
EN
12525:2000
|
Agricultural
machinery - Front loaders - Safety
|
20.05.2000
|
|
CEN
|
EN
12545:2000
|
Footwear,
leather and imitation leather goods
manufacturing machines - Noise test code -
Common requirements.
|
10.03.2001
|
|
CEN
|
EN
12547:1999
|
Centrifuges
- Common safety requirements
|
11.06.1999
|
|
CEN
|
EN
12549:1999
|
Acoustics
- Noise test code for fastener driving tools
- Engineering method
|
15.04.2000
|
|
CEN
|
EN
12601:2001
|
Reciprocating
internal combustion engine driven generating
sets - Safety
|
14.08.2003
|
|
CEN
|
EN
12622:2001
|
Safety
of machine tools - Hydraulic press brakes
|
14.06.2002
|
|
CEN
|
EN
12626:1997
|
Safety
of machinery - Laser processing machines –
Safety requirements (ISO 11553:1996
modified)
|
04.06.1997
|
|
CEN
|
EN
12629-1:2000
|
Machines
for the manufacture of constructional
products from concrete and calcium-silicate
- Safety - Part 1: Common requirements.
|
27.11.2001
|
|
CEN
|
EN
12629-4:2001
|
Machines
for the manufacture of constructional
products from concrete and calcium-silicate
- Safety - Part 4: Concrete roof tile making
machines.
|
27.11.2001
|
|
CEN
|
EN
12639:2000
|
Liquid
pumps and pumps units - Noise test code -
Grade 2 and grade 3 of accuracy.
|
10.03.2001
|
|
CEN
|
EN
12643:1997
|
Earth-moving
machinery - Rubber-tyred machines - Steering
requirements (ISO 5010:1992 modified)
|
13.03.1998
|
|
CEN
|
EN
12644-1:2000
|
Cranes
- Information for use and testing - Part 1:
Instruction.
|
27.11.2001
|
|
CEN
|
EN
12644-2:2000
|
Cranes
- Information for use and testing - Part 2:
Marking
|
20.05.2000
|
|
CEN
|
EN
12653:1999
|
Footwear,
leather and imitation leather manufacturing
machines - Nailing machines - Safety
requirements.
|
27.11.2001
|
|
CEN
|
EN
12717:2001
|
Safety
of machine tools - Drilling machines
|
14.06.2002
|
|
CEN
|
EN
12733:2001
|
Agricultural
and forestry machinery - Pedestrian
controlled motor mowers - Safety
|
14.06.2002
|
|
CEN
|
EN
12750:2001
|
Safety
of woodworking machines - Four sided
moulding machines
|
14.06.2002
|
|
CEN
|
EN
12840:2001
|
Safety
of machine-tools - Manually controlled
turning machines with or without automatic
control
|
14.06.2002
|
|
CEN
|
EN
12852:2001
|
Food
processing machinery - Food processors and
blenders - Safety and hygiene requirements
|
14.06.2002
|
|
CEN
|
EN
12853:2001
|
Food
processing machinery - Hand-held blenders
and whisks - Safety and hygiene requirements
|
14.06.2002
|
|
CEN
|
EN
12882:2001
|
Conveyor
belts for general purpose use - Electrical
and flammability safety requirements
|
24.06.2003
|
|
CEN
|
EN
12957:2001
|
Machine
tools - Safety - Electro discharge machines
|
14.06.2002
|
|
CEN
|
EN
12999:2002
|
Cranes
– Loader cranes
|
14.08.2003
|
|
CEN
|
EN
13015:2001
|
Maintenance
for lifts and escalators - Rules for
maintenance instructions
|
14.06.2002
|
|
CEN
|
EN
13019:2001
|
Machines
for road surface cleaning - Safety
requirements.
|
27.11.2001
|
|
CEN
|
EN
13059:2002
|
Safety
of industrial trucks – Test methods for
measuring vibrations
|
14.08.2003
|
|
CEN
|
EN
13112:2002
|
Tannery
machines - Splitting and bandknife shearing
machines - Safety requirements
|
24.06.2003
|
|
CEN
|
EN
13113:2002
|
Tannery
machines - Roller coating machines - Safety
requirements
|
24.06.2003
|
|
CEN
|
EN
13114:2002
|
Tannery
machinery - Rotating process vessels -
Safety requirements
|
24.06.2003
|
|
CEN
|
EN
13118:2000
|
Agricultural
machinery - Potato harvesting equipment -
Safety.
|
27.11.2001
|
|
CEN
|
EN
13128:2001
|
Safety
of machine tools - Milling machines
(including boring machines)
|
14.06.2002
|
|
CEN
|
EN
13140:2000
|
Agricultural
machinery - Sugar beet and fodder beet
harvesting equipment - Safety.
|
27.11.2001
|
|
CEN
|
EN
13218:2002
|
Machine
tool – Safety – Stationary grinding
machines
|
14.08.2003
|
|
CEN
|
EN
13289:2001
|
Pasta
processing plants - Dryers and coolers -
Safety and hygiene requirements
|
14.06.2002
|
|
CEN
|
EN
13378:2001
|
Pasta
processing plants - Pasta presses - Safety
and hygiene requirements
|
14.06.2002
|
|
CEN
|
EN
13379:2001
|
Pasta
processing plants - Spreader, stripping and
cutting machine, stick return conveyor,
stick magazine - Safety and hygiene
requirements
|
14.06.2002
|
|
CEN
|
EN
13390:2002
|
Food
processing machinery - Pie and tart machines
- Safety and hygiene requirements
|
14.06.2002
|
|
CEN
|
EN
13411-1:2001
|
Terminations
for steel wire ropes - Safety - Part 1:
General purpose thimbles
|
24.06.2003
|
|
CEN
|
EN
13411-2:2001
|
Terminations
for steel wire rope - Safety - Part 2 :
Splicing of eyes for wire rope slings
|
14.06.2002
|
|
CEN
|
EN
13411-4:2002
|
Terminations
for steel wire ropes - Safety - Part 4:
Metal and resin socketing
|
14.06.2002
|
|
CEN
|
EN
13448:2001
|
Agricultural
and forestry machinery - Inter-row mowing
units - Safety
|
14.06.2002
|
|
CEN
|
EN
13478:2001
|
Safety
of machinery - Fire prevention and
protection
|
14.06.2002
|
|
CEN
|
EN
13490:2001
|
Mechanical
vibration – Industrial trucks –
Laboratory evaluation and specification of
operator seat vibration
|
14.08.2003
|
|
CEN
|
EN
13510:2000
|
Earth-moving
machinery - Roll-over protective structures
- Laboratory tests and performance
requirements (ISO 3471:1994, including
Amendment 1:1997 modified)
|
16.06.2000
|
|
CEN
|
EN
13531:2001
|
Earth-moving
machinery - Tip-over structure (TOPS) for
compact excavators - Laboratory tests and
performance requirements (ISO 12117:1997
modified)
|
14.06.2002
|
|
CEN
|
EN
13627:2000
|
Earth-moving
machinery - Falling-object protective
structures - Laboratory tests and
performance requirements (ISO 3449:1992
modified)
|
14.06.2002
|
|
CEN
|
EN
13732:2002
|
Food
processing machinery – Bulk milk coolers
on farm – Requirements for construction,
performance, suitability for use, safety and
hygiene
|
14.08.2003
|
|
CEN
|
EN
13736:2003
|
Safety
of machine tools – Pneumatic presses
|
14.08.2003
|
|
CEN
|
EN
ISO 13753:1998
|
Mechanical
vibration and shock - Hand-arm vibration -
Method for measuring the vibration
transmissibility of resilient materials when
loaded by the hand-arm system (ISO
13753:1998)
|
15.10.1998
|
|
CEN
|
EN
13788:2001
|
Machine
tools - Safety - Multi-spindle automatic
turning machines
|
24.06.2003
|
|
CEN
|
EN
13862:2001
|
Floor
sawing machines - Safety
|
14.08.2003
|
|
Warning :
The presumption of conformity, conferred by
standard EN 500-5 of 1995 published in the
Official Journal of the European Communities
C 42, 14.02.1996, ends from the date of this
publication.
|
|
CEN
|
EN
13985:2003
|
Machine
tools – Safety – Guillotine shears
|
14.08.2003
|
|
CEN
|
EN
ISO 14122-1: 2001
|
Safety
of machinery - Permanent means of access to
machines and industrial plants - Part 1:
Choice of a fixed means of access between
two levels (ISO 14122-1:2001)
|
14.06.2002
|
|
CEN
|
EN
ISO 14122-2: 2001
|
Safety
of machinery - Permanent means of access to
machines and industrial plants - Part 2:
Working platforms and Walkways (ISO
14122-2:2001)
|
14.06.2002
|
|
CEN
|
EN
ISO 14122-3: 2001
|
Safety
of machinery - Permanent means of access to
machines and industrial plants - Part 3:
Stairways, stepladders and guard-rails (ISO
14122-3:2001)
|
14.06.2002
|
|
CEN
|
EN
ISO 14738:2002
|
Safety
of machinery - Anthropometric requirements
for the design of workstations at machinery
(ISO 14738:2002)
|
14.08.2003
|
|
CEN
|
EN
ISO 14982:1998
|
Agricultural
and forestry machines - Electromagnetic
compatibility - Test methods and acceptance
criteria (ISO 14982:1998)
|
15.10.1998
|
|
CEN
|
EN
ISO 15744:2002
|
Hand-held
non-electric power tools - Noise measurement
code - Engineering method (grade 2)
(ISO 15744:2002)
|
24.06.2003
|
|
CEN
|
EN
25136:1993
|
Acoustics
- Determination of sound power radiated into
a duct by fans - In-duct method (ISO
5136:1990 and Technical Corrigendum 1:1993)
|
31.12.1994
|
|
CEN
|
EN
28662-1:1992
|
Hand-held
portable power tools - Measurement of
vibrations at the handle - Part 1 : General
(ISO 8662-1:1988)
|
31.12.1994
|
|
CEN
|
EN
28662-2:1994
|
Hand-held
portable power tools - Measurement of
vibrations at the handle - Part 2 : Chipping
hammers and riveting hammers (ISO
8662-2:1992)
|
14.02.1996
|
|
CEN
|
EN
28662-2.A1:
1995
|
Hand-held
portable tools - Measurement of vibrations
at the handle - Part 2 : Chipping hammers
and riveting hammers - Amendment 1
|
14.02.1996
|
|
CEN
|
EN
28662-2.A2: 2001.
|
Hand-held
portable tools - Measurement of vibrations
at the handle - Part 2: Chipping hammers and
riveting hammers (ISO 8662-2:1992) -
Amendment 2
|
14.06.2002
|
|
CEN
|
EN
28662-3:1994
|
Hand-held
portable tools - Measurement of vibrations
at the handle - Part 3 : Rock drills and
rotary hammers (ISO 8662-3:1992)
|
14.02.1996
|
|
CEN
|
EN
28662-3.A1:
1995
|
Hand-held
portable tools - Measurement of vibrations
at the handle - Part 3 : Rock drills and
rotary hammers - Amendment 1
|
14.02.1996
|
|
CEN
|
EN
28662-3.A2: 2001
|
Hand-held
portable power tools - Measurement of
vibrations at the handle - Part 3: Rock
drills and rotary hammers (ISO
8662-3:1992.AM 1:1999) - Amendment 2
|
14.06.2002
|
|
CEN
|
EN
28662-5:1994
|
Hand-held
portable tools - Measurement of vibrations
at the handle - Part 5 : Pavement breakers
and hammers for construction work (ISO
8662-5:1992)
|
14.02.1996
|
|
CEN
|
EN
28662-5/A1:
1995
|
Hand-held
portable tools - Measurement of vibrations
at the handle - Part 5 : Pavement breakers
and hammers for construction work -
Amendment 1
|
14.02.1996
|
|
CEN
|
EN
30326-1:1994
|
Mechanical
vibration - Laboratory method for evaluating
vehicle seat vibration - Part 1: Basic
requirements (ISO 10326-1:1992)
|
14.02.1996
|
|
CEN
|
EN
31252:1994
|
Lasers
and laser-related equipment - Laser device -
Minimum requirements for documentation (ISO
11252:1993)
|
31.12.1994
|
|
CEN
|
EN
31253:1994
|
Laser
and laser-related equipment - Laser device -
Mechanical interfaces (ISO 11253:1993)
|
31.12.1994
|
|
Cenelec
|
EN
50144-1:1998
|
Safety
of hand-held electric motor operated tools -
Part 1: General requirements
|
15.04.2000
|
|
Cenelec
|
EN
50144-1/A1:
2002
|
Safety
of hand-held electric motor operated tools -
Part 1: General requirements - Amendment 1
|
24.06.2003
|
|
Cenelec
|
EN
50144-2-1:1999
|
Safety
of hand-held electric motor operated tools -
Part 2-1: Particular requirements for drills
|
20.05.2000
|
|
Cenelec
|
EN
50144-2-2:1999
|
Safety
of hand-held electric motor operated tools -
Part 2-2: Particular requirements for
screwdrivers and impact wrenches
|
20.05.2000
|
|
Cenelec
|
EN
50144-2-3:2002
|
Safety
of hand-held electric motor operated tools
-- Part 2-3: Particular requirements for
grinders, disk type sanders and polishers
|
14.08.2003
|
|
Cenelec
|
EN
50144-2-3:2002
/A1:2002
|
Safety
of hand-held electric motor operated tools
-- Part 2-3: Particular requirements for
grinders, disk type sanders and polishers
– Amendment 1
|
14.08.2003
|
|
Cenelec
|
EN
50144-2-4:1999
|
Safety
of hand-held electric motor operated tools -
Part 2-4: Particular requirements for
sanders
|
20.05.2000
|
|
Cenelec
|
EN
50144-2-5:1999
|
Safety
of hand-held electric motor operated tools -
Part 2-5: Particular requirements for
circular saws and circular knives
|
20.05.2000
|
|
Cenelec
|
EN
50144-2-6:2000
|
Safety
of hand-held electric motor operated tools -
Part 2-6: Particular requirements for
hammers.
|
27.11.2001
|
|
Cenelec
|
EN
50144-2-6/A1: 2001
|
Safety
of hand-held electric motor operated tools -
Part 2-6: Particular requirements for
hammers - Amendment 1
|
27.11.2001
|
|
Cenelec
|
EN
50144-2-7:2000
|
Safety
of hand-held electric motor operated tools -
Part 2-7: Particular requirements for spray
guns.
|
27.11.2001
|
|
Cenelec
|
EN
50144-2-10:2001
|
Safety
of hand-held electric motor operated tools -
Part 2-10: Particular requirements for jig
saws.
|
27.11.2001
|
|
Cenelec
|
EN
50144-2-13:2002
|
Safety
of hand-held electric motor operated tools
-- Part 2-13: Particular requirements for
chain saws
|
14.08.2003
|
|
Cenelec
|
EN
50144-2-14:2001
|
Safety
of hand-held electric motor operated tools -
Part 2-14: Particular requirements for
planers.
|
27.11.2001
|
|
Cenelec
|
EN
50144-2-15:2001
|
Safety
of hand-held electric motor operated tools -
Part 2-15: Particular requirements for hedge
trimmers.
|
27.11.2001
|
|
Cenelec
|
EN
50144-2-17:2000
|
Safety
of hand-held electric motor operated tools -
Part 2-17: Particular requirements for
routers
|
20.05.2000
|
|
Cenelec
|
EN
50144-2-18:2000
|
Safety
of hand-held electric motor operated tools -
Part 2-18: Particular requirements for
laminate trimmers
|
20.05.2000
|
|
Cenelec
|
EN
50260-1:2002
|
Safety
of hand-held battery-powered motor-operated
tools and battery packs - Part 1: General
requirements
|
24.06.2003
|
|
Cenelec
|
EN
50260-2-1:2002
|
Safety
of hand-held battery-powered motor-operated
tools and battery packs - Part 2-1:
Particular requirements for drills
|
24.06.2003
|
|
Cenelec
|
EN
50260-2-2:2002
|
Safety
of hand-held battery-powered motor-operated
tools and battery packs - Part 2-2:
Particular requirements for screwdrivers and
impact wrenches
|
24.06.2003
|
|
Cenelec
|
EN
50260-2-4:2002
|
Safety
of hand-held battery-powered motor-operated
tools and battery packs - Part 2-4:
Particular requirements for sanders
|
24.06.2003
|
|
Cenelec
|
EN
50260-2-5:2002
|
Safety
of hand-held battery-powered motor-operated
tools and battery packs - Part 2-5:
Particular requirements for circular saws
and circular knives
|
24.06.2003
|
|
Cenelec
|
EN
50260-2-6:2002
|
Safety
of hand-held battery-powered motor-operated
tools and battery packs - Part 2-6:
Particular requirements for hammers
|
24.06.2003
|
|
Cenelec
|
EN
50260-2-7:2002
|
Safety
of hand-held battery-powered motor-operated
tools and battery packs - Part 2-7:
Particular requirements for spray guns
|
24.06.2003
|
|
Cenelec
|
EN
50260-2-10:2002
|
Safety
of hand-held battery-powered motor-operated
tools and battery packs - Part 2-10:
Particular requirements for reciprocating
saws
|
24.06.2003
|
|
Cenelec
|
EN
50260-2-14:2002
|
Safety
of hand-held battery-powered motor-operated
tools and battery packs - Part 2-14:
Particular requirements for routers and
laminate trimmers
|
24.06.2003
|
|
Cenelec
|
EN
50338:2000
|
Safety
of household and similar electrical
appliances - Particular requirements for
pedestrian controlled battery powered
electrical lawnmowers.
|
27.11.2001
|
|
Cenelec
|
EN
60204-1:1997
|
Safety
of machinery - Electrical equipment of
machines - Part 1: General requirements (IEC
60204-1:1997)
|
20.05.2000
|
|
Cenelec
|
EN
60204-11:2000
|
Safety
of machinery - Electrical equipment of
machines - Part 11: Requirements for HV
equipment for voltages above 1 000 V a.c. or
1 500 V d.c. and not exceeding 36 kV (IEC
60204-11:2000)
|
27.11.2001
|
|
Cenelec
|
EN
60204-31:1998
|
Safety
of machinery - Electrical equipment of
machines - Part 31: Particular safety and
EMC requirements for sewing machines, units
and systems (IEC 60204-31:1996 – Modified)
|
15.04.2000
|
|
Cenelec
|
EN
60204-32:1998
|
Safety
of machinery - Electrical equipment of
machines - Part 32: Requirements for
hoisting machines (IEC 60204-32:1998)
|
15.04.2000
|
|
Cenelec
|
EN
60335-1:1994
|
Safety
of household and similar electrical
appliances - Part 1: General requirements (IEC
60335-1:1991 - Modified)
|
15.04.2000
|
|
Cenelec
|
EN
60335-1/A1:
1996
|
Safety
of household and similar electrical
appliances - Part 1: General requirements -
Amendment 1 (IEC 60335-1:1991/A1:1994 -
Modified)
|
15.04.2000
|
|
Cenelec
|
EN
60335-1/A2:
2000
|
Safety
of household and similar electrical
appliances - Part 1: General requirements -
Amendment 2 (IEC 60335-1:1991/A2:1999)
|
27.11.2001
|
|
Cenelec
|
EN
60335-1/A11:
1995
|
Safety
of household and similar electrical
appliances - Part 1: General requirements -
Amendment 11
|
15.04.2000
|
|
Cenelec
|
EN
60335-1/A12:
1996
|
Safety
of household and similar electrical
appliances - Part 1: General requirements -
Amendment 12
|
15.04.2000
|
|
Cenelec
|
EN
60335-1/A13:
1998
|
Safety
of household and similar electrical
appliances - Part 1: General requirements -
Amendment 13
|
15.04.2000
|
|
Cenelec
|
EN
60335-1/A14:
1998
|
Safety
of household and similar electrical
appliances - Part 1: General requirements -
Amendment 14
|
15.04.2000
|
|
Cenelec
|
EN
60335-1/A15:
2000
|
Safety
of household and similar electrical
appliances - Part 1: General requirements -
Amendment 15
|
10.03.2001
|
|
Cenelec
|
EN
60335-1/A16:
2001
|
Safety
of household and similar electrical
appliances - Part 1: General requirements -
Amendment 16
|
27.11.2001
|
|
Cenelec
|
EN
60335-1:2002
|
Household
and similar electrical appliances - Safety
-- Part 1: General requirements (IEC
60335-1:2001 Modified)
|
14.08.2003
|
|
Cenelec
|
EN
60335-2-64:2000
|
Safety
of household and similar electrical
appliances - Part 2-64: Particular
requirements for commercial electric kitchen
machines (IEC 60335-2-64:1997 - Modified)
|
20.05.2000
|
|
Cenelec
|
EN
60335-2-64/A1:
2002
|
Safety
of household and similar electrical
appliances - Part 2-64: Particular
requirements for commercial electric kitchen
machines - Amendment 1 (IEC
60335-2-64:1997/A1:2000 - Modified)
|
24.06.2003
|
|
Cenelec
|
EN
60335-2-72:1998
|
Safety
of household and similar electrical
appliances - Part 2-72: Particular
requirements for automatic machines for
floor treatment for commercial and
industrial use (IEC 60335-2-72:1995 -
Modified)
|
15.04.2000
|
|
Cenelec
|
EN
60335-2-72/A1: 2000
|
Safety
of household and similar electrical
appliances - Part 2-72: Particular
requirements for automatic machines for
floor treatment for commercial and
industrial use - Amendment 1 (IEC
60335-2-72:1995/A1:2000)
|
10.03.2001
|
|
Cenelec
|
EN
60335-2-77:2000
|
Safety
of household and similar electrical
appliances - Part 2-77: Particular
requirements for pedestrian controlled
mains-operated lawnmowers. (IEC
60335-2-77:1996 - Modified)
|
27.11.2001
|
|
Cenelec
|
EN
60947-5-3:1999
|
Low-voltage
switchgear and controlgear - Part 5-3:
Control circuit devices and switching
elements – Requirements for proximity
devices with defined behaviour under fault
conditions (PDF) - (IEC 60947-5-3:1999)
|
24.06.2003
|
|
Cenelec
|
EN
60947-5-5:1997
|
Low-voltage
switchgear and controlgear - Part 5-5:
Control circuit devices and switching
elements - Electrical emergency stop device
with mechanical latching function. (IEC
60947-5-5:1997)
|
10.03.2001
|
|
Cenelec
|
EN
61029-1:2000
|
Safety
of transportable motor-operated electric
tools - Part 1: General requirements - (IEC
61029-1:1990 - Modified)
|
10.03.2001
|
|
Cenelec
|
EN
61029-2-1:2002
|
Safety
of transportable motor-operated electric
tools - Part
2-1: Particular requirements for circular
saw benches – (IEC 61029-2-1:1993 +
A1:1999 + A2:2001 Modified)
|
24.06.2003
|
|
Cenelec
|
EN
61029-2-4:2003
|
Safety
of transportable motor-operated electric
tools - Part
2-4: Particular requirements for bench
grinders (IEC 61029-2-4:1993 Modified)
|
14.08.2003
|
|
Cenelec
|
EN
61029-2-9:2002
|
Safety
of transportable motor-operated electric
tools - Part
2-9: Particular requirements for mitre saws
(IEC 61029-2-9:1995 Modified)
|
14.08.2003
|
|
Cenelec
|
EN
61310-1:1995
|
Safety
of machinery - Indication, marking and
actuation - Part 1: Requirements for visual,
auditory and tactile signals (IEC
61310-1:1995)
|
15.04.2000
|
|
Cenelec
|
EN
61310-2:1995
|
Safety
of machinery - Indication, marking and
actuation - Part 2: Requirements for marking
(IEC 61310-2:1995)
|
15.04.2000
|
|
Cenelec
|
EN
61310-3:1999
|
Safety
of machinery - Indication, marking and
actuation - Part 3: Requirements for the
location and operation of actuators (IEC
61310-3:1999)
|
15.04.2000
|
|
Cenelec
|
EN
61496-1:1997
|
Safety
of machinery - Electro-sensitive protective
equipment - Part 1: General requirements and
tests (IEC 61496-1:1997)
|
15.04.2000
|
Contact
us